http://plsusa.net/wp-content/uploads/2017/03/1-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series E103S
http://plsusa.net/wp-content/uploads/2017/03/2-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series E203S
http://plsusa.net/wp-content/uploads/2017/03/3-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series EX16C
http://plsusa.net/wp-content/uploads/2017/03/4-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series EX08S
http://plsusa.net/wp-content/uploads/2017/03/5-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series EX08C
http://plsusa.net/wp-content/uploads/2017/03/6-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series EA08C
http://plsusa.net/wp-content/uploads/2017/03/7-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series E308A
http://plsusa.net/wp-content/uploads/2017/03/8-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series E206S
http://plsusa.net/wp-content/uploads/2017/03/9-Heritage-Classic-E103S.jpg
Heritage Classic™ E-Series E103S

Heritage Classic™ E-Series is one of Northwest Door’s finest handcrafted wood carriage house style garage doors. These flush insulated wood doors are built with specially framed and sized sections to receive wood overlay designs. Skilled artisans can replicate most any design that you or your architect can create. Choose from select woods like Cedar, Tight Knot Cedar, Redwood, Knotty Alder, VG Fir, Meranti and other fine woods.

General Information

  • Frame thickness: 1-1/8″, Face material thickness: 1/4″, Overlay thickness: 3/4″,
  • Overall door thickness: 2-1/4″
  • End Stiles: 5-1/2″, Center Stiles: 10
  • Bottom Rail: 7-1/2″, Top Rail: 5-1/2″, Meeting Rail width combined: 5″
  • Arches: Standard radius for doors up to 10′ wide door are 15′-0″ radius, those over 10′ wide are a single 58′-0″ radius or two 15′-0″ radius arches (double arches)
  • Calculated insulation rating through section, R Value=6.18
    * R values are calculated specifically for the colder climates and offer the best long term insulating value.
  • Finish: Face sanded ready for finishing
STANDARD WIDTHS: 8′-0″ 9′-0″ 16′-0″ 18′-0″
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0″

Hardware

The Heritage is equipped with heavy duty 15″ radius torsion hardware; track is 2″, verticals are angle mounted, horizontal track has continuous reinforcing angle. 3″ track supplied when required by weight. Long stem 10 ball bearing rollers with nylon races, non corrosive door fixtures and graduated 14 Ga. double end hinges are standard. All doors include one strut per section, 2-1/4″ or 3″ depending door width and weight.

Recommended Options

Extended Life

  • 25,000 Cycle Torsion Springs
  • Heavy Gauge Hinges
  • Heavy Duty Cables

LiftMaster 8587W Opener

Other Options

  • Prime paint
  • Deco Kit B
  • Single pane and insulated glass options
  • Low clearance, high lift, or vertical lift hardware
  • White nylon ball bearing rollers
  • Angle mounted track
  • Double end hinges and long stem rollers
  • 25,000, 50,000 and 100,000 cycle torsion springs

Glass

* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.

Before

After

Before & After