Heritage Classic™ C-Series C108S
Heritage Classic™ C-Series C108C
Heritage Classic™ C-Series C004S
Heritage Classic™ C-Series C006S
Heritage Classic™ C-Series C008C
Heritage Classic™ C-Series C104S
Heritage Classic™ C-Series C108A
Heritage Classic™ C-Series C108C
Heritage Classic™ C-Series CX04S

Heritage Classic™ C-Series is one Northwest Door’s finest handcrafted wood carriage house style garage doors. The C-Series has an additional layer of T&G wood on the door face of the E-Series doors. The 1×4, 1×6 or 1×8 T&G wood can run vertically, horizontally, diagonally or in a herringbone configuration to your specifications. Skilled artisans can replicate most any design that you or your architect can create. Choose from select woods like Cedar, Tight Knot Cedar, Redwood, Knotty Alder, VG Fir, Meranti and other fine woods.

General Information

  • Frame thickness: 1-1/8″, Face material thickness: 1/4″, Overlay thickness: 3/4″,
  • Overall door thickness: 2.875″
  • End Stiles: 5-1/2″, Center Stiles: 10
  • Bottom Rail: 7-1/2″, Top Rail: 5-1/2″, Meeting Rail width combined: 5″
  • Arches: Standard radius for doors up to 10′ wide door are 15′-0″ radius, those over 10′ wide are a single 58′-0″ radius or two 15′-0″ radius arches (double arches)
  • Calculated insulation rating through section, R Value=6.18
    * R values are calculated specifically for the colder climates and offer the best long term insulating value.
  • Finish: Face sanded ready for finishing
STANDARD WIDTHS: 8′-0″ 9′-0″ 16′-0″ 18′-0″
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0″


The Heritage is equipped with heavy duty 15″ radius torsion hardware; track is 2″, verticals are angle mounted, horizontal track has continuous reinforcing angle. 3″ track supplied when required by weight. Long stem 10 ball bearing rollers with nylon races, non corrosive door fixtures and graduated 14 Ga. double end hinges are standard. All doors include one strut per section, 2-1/4″ or 3″ depending door width and weight.

Recommended Options

Extended Life

  • 25,000 Cycle Torsion Springs
  • Heavy Gauge Hinges
  • Heavy Duty Cables

LiftMaster Model 8587W Opener

Other Options

  • Prime Paint
  • Deco Kit B
  • Single Pane and Insulated Glass Options
  • Low Clearance, High Lift, or Vertical Lift Hardware
  • White Nylon Ball Bearing Rollers
  • Angle Mounted Track
  • Double End Hinges and Long Stem Rollers
  • 25,000, 50,000 and 100,000 Cycle Torsion Springs


* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.



Before & After